MECHANICAL ENGINEERING
About Us
K. N. Toosi mechanical engineers do not just response to the society’s requirements, they recognize the future needs and innovate for it, and lead to a better destiny. Our programs are to impact the world through a sturdy curriculum, significant research and glorious design experiences.
Our goal is to educate those who are making the world to change.
Our History
The Faculty of Mechanical Engineering was officially established in 1973. It is one of the best known Institution in the country. In 1980, two main departments namely solid mechanics and fluid and heat engineering was formed. In 1993 production and manufacturing engineering was initiated and in 2001, automotive engineering, materials engineering, energy systems departments has been started. Finally, in 2012 based on multidisciplinary cooperation, mechatronics engineering has been established.
Research
With more than 45 faculty members, an annual average of more than 120 international papers, and more than 650 graduate students, the Faculty of Mechanical Engineering is one of the university engines of research and innovation.
Core research areas:
- Control and Dynamic Systems
- Robotics
- Instrumentations
- Fracture Mechanics
- Damage Mechanics
- Biomechanics
- Soft Computing
- Fracture Mechanics
Core Research Labs:
- Research Vibration & Dynamic
- Robotics, Measurement and Advanced Control
- Robotics and Control
- Virtual Reality
- Neural Network
- Mechatronics mechanism
- Composites
Core research areas:
- Multiphase Flow
- Numerical Methods
- CFD
- Transport Phenomena
- Porous Media and Complex Fluids
- Applied Mathematics in Engineering
- Numerical Simulation of Thermo-Fluid Analysis
Core Research Labs:
- Design and manufacturing of optimized aerodynamic systems
- Micro Calories metering
- Multi Phases flows
- Turbo machines
- Environmental engineering
- Nano technology
- Fuel cell
Core research areas:
- Traditional and non-traditional Machining
- Design of experiments
- Manufacturing system design
- CAD/CAM
- Non-destructive tests
- Forming and fracture study
- Manufacturing Executive Systems (MES)
- Enterprise Resource Planning (ERP)
Core Research Labs:
- Virtual design and Manufacturing Systems
- Special Machining
- Modern shaping
- Advanced Manufacturing research
- Non Destructive test
- Industry 4.0
- IOT in Manufacturing
Core research areas:
- Explosive forming
- Machine tools design
- Composite Materials
- Enterprise Resource Planning
- Additive manufacturing
Core Research Labs:
- Automotive engineering
- Advanced Vehicle systems
Core research areas:
- Cavitation
- Optimization
- Power Generation
- Electrochemical Systems,
- Renewable Energies
- Thermal Power Plant
- Solar Energy
Core Research Labs:
- Energy and process integration
- Optimization of energy systems
Core research areas:
- Assistive Robotics
- Bio-mechatronic Systems
- Bio-MEMS
- Fault Diagnosis
- Intelligent Systems
- System Identification
- Wearable Technologies
Core Research Labs:
- Fault Detection and Identification Laboratory
- Mechatronics Laboratory (Electrical Eng.)
- Mechatronics Laboratory (Mechanical Eng.)
- Solid Mechanics
-
Core research areas:
- Control and Dynamic Systems
- Robotics
- Instrumentations
- Fracture Mechanics
- Damage Mechanics
- Biomechanics
- Soft Computing
- Fracture Mechanics
Core Research Labs:
- Research Vibration & Dynamic
- Robotics, Measurement and Advanced Control
- Robotics and Control
- Virtual Reality
- Neural Network
- Mechatronics mechanism
- Composites
- Heat and Fluids
-
Core research areas:
- Multiphase Flow
- Numerical Methods
- CFD
- Transport Phenomena
- Porous Media and Complex Fluids
- Applied Mathematics in Engineering
- Numerical Simulation of Thermo-Fluid Analysis
Core Research Labs:
- Design and manufacturing of optimized aerodynamic systems
- Micro Calories metering
- Multi Phases flows
- Turbo machines
- Environmental engineering
- Nano technology
- Fuel cell
- Production and Manufacturing
-
Core research areas:
- Traditional and non-traditional Machining
- Design of experiments
- Manufacturing system design
- CAD/CAM
- Non-destructive tests
- Forming and fracture study
- Manufacturing Executive Systems (MES)
- Enterprise Resource Planning (ERP)
Core Research Labs:
- Virtual design and Manufacturing Systems
- Special Machining
- Modern shaping
- Advanced Manufacturing research
- Non Destructive test
- Industry 4.0
- IOT in Manufacturing
- Automotive Engineering
-
Core research areas:
- Explosive forming
- Machine tools design
- Composite Materials
- Enterprise Resource Planning
- Additive manufacturing
Core Research Labs:
- Automotive engineering
- Advanced Vehicle systems
- Energy Systems
-
Core research areas:
- Cavitation
- Optimization
- Power Generation
- Electrochemical Systems,
- Renewable Energies
- Thermal Power Plant
- Solar Energy
Core Research Labs:
- Energy and process integration
- Optimization of energy systems
- Mechatronics
-
Core research areas:
- Assistive Robotics
- Bio-mechatronic Systems
- Bio-MEMS
- Fault Diagnosis
- Intelligent Systems
- System Identification
- Wearable Technologies
Core Research Labs:
- Fault Detection and Identification Laboratory
- Mechatronics Laboratory (Electrical Eng.)
- Mechatronics Laboratory (Mechanical Eng.)
Prominent Research Areas:
Major Research areas of the Faculty includes:
|
|
Academics
We believe learning is a collective effort of students, teachers, families and communities to be included in enriched environments, flexible and creative groups. Our professors and students are committed to creating and implementing new educational and technological methods that enhance methods of learning. The following academic programs is offered in the Faculty of Mechanical Engineering.
Programs and Degrees:
| BSc | MSc | PhD |
|---|---|---|
| Mechanical engineering | Applied Design
Energy Conversion Manufacturing Mechatronics Material Science Automotive engineering |
Applied Design
Energy Conversion |
International Joint Programs:
Faculty of Mechanical Engineering of K. N. Toosi University of Technology benefits from its extensive international academic collaborations. The Faculty experienced joint masters’ programs in Energy Systems with Manchester University (United Kingdom) in the past, and University of Waterloo (Canada) at Ph.D. level.
Faculty Members
| Faculty Member | Faculty | Department |
|---|---|---|
 Masoud Asgari | Mechanical Engineering | Automotive Engineering |
 Shahram Azadi | Mechanical Engineering | Automotive Engineering |
 Reza Kazemi | Mechanical Engineering | Automotive Engineering |
 Amir Hossein Shamekhi | Mechanical Engineering | Automotive Engineering |
 Mohammad Shariyat | Mechanical Engineering | Automotive Engineering |
 Amir Taghavipour | Mechanical Engineering | Automotive Engineering |
 Majid Amidpour | Mechanical Engineering | Energy Systems |
 Ali Behbahaninia | Mechanical Engineering | Energy Systems |
 Shima Najafinobar | Mechanical Engineering | Energy Systems |
 Omid Pourali | Mechanical Engineering | Energy Systems |
 Zeinab Pouransari | Mechanical Engineering | Energy Systems |
 Hossein Sayyadi | Mechanical Engineering | Energy Systems |
 Farshad Torabi | Mechanical Engineering | Energy Systems |
 Mona Zamanipedram | Mechanical Engineering | Energy Systems |
 Cyrus Aghanajafi | Mechanical Engineering | Heat and Fluids |
 Ali Ashrafizadeh | Mechanical Engineering | Heat and Fluids |
 Majid Bazargan | Mechanical Engineering | Heat and Fluids |
 Majid Ghasemi | Mechanical Engineering | Heat and Fluids |
 Ali Keshavarz Valian | Mechanical Engineering | Heat and Fluids |
 Afsaneh Mojra | Mechanical Engineering | Heat and Fluids |
 Sadegh Seddighi | Mechanical Engineering | Heat and Fluids |
 Abdollah Shadaram | Mechanical Engineering | Heat and Fluids |
 Azadeh Shahidian | Mechanical Engineering | Heat and Fluids |
 Mohammad Reza Shahnazari | Mechanical Engineering | Heat and Fluids |
 Mehrzad Shams | Mechanical Engineering | Heat and Fluids |
 Mahkameh Sharbatdar | Mechanical Engineering | Heat and Fluids |
 Majid Soltani | Mechanical Engineering | Heat and Fluids |
 Masoud Ziabasharhagh | Mechanical Engineering | Heat and Fluids |
 Ali Najafi Ardakani | Mechanical Engineering | Mechatronics |
 Majid Ghoreishi | Mechanical Engineering | Production and Manufacturing |
 Farhang Honarvar | Mechanical Engineering | Production and Manufacturing |
 Abdolhossien Jalali Aghchai | Mechanical Engineering | Production and Manufacturing |
 Mehrdad Kazerooni | Mechanical Engineering | Production and Manufacturing |
 Soheil Nakhodchi | Mechanical Engineering | Production and Manufacturing |
 Mehrdad Vahdati | Mechanical Engineering | Production and Manufacturing |
 Jamal Zamani | Mechanical Engineering | Production and Manufacturing |
 Ali Ghaffari | Mechanical Engineering | Solid Mechanics |
 Rahmatollah Ghajar | Mechanical Engineering | Solid Mechanics |
 Mohammad Reza Homaeinezhad | Mechanical Engineering | Solid Mechanics |
 Ali Asghar Jafari | Mechanical Engineering | Solid Mechanics |
 | Mechanical Engineering | Solid Mechanics |
 | Mechanical Engineering | Solid Mechanics |
 Ali Nahvi | Mechanical Engineering | Solid Mechanics |
 Naser Naserifar | Mechanical Engineering | Solid Mechanics |
 Mohammad Ravandi | Mechanical Engineering | Solid Mechanics |
 Seyed Hossein Sadati | Mechanical Engineering | Solid Mechanics |
 Amir Reza Shahani | Mechanical Engineering | Solid Mechanics |
Contact Us
Address: Faculty of Mechanical Engineering,
No. 17- Pardis Ave., Mollasadra St., Vanak Square, Tehran, Iran
Telephone: +98-21-8867-4747
Fax: +98-21-8867-4748
P.O.Box: 19395-19919
Postal Code: 19991-43344